Electric Fireplace Wall Hanging Ideas
The wall-mount electric fireplaces can be put to use straight from the box. They're an excellent way to add ambience without venting or renovation.
However, they typically require careful installation because they're generally heavy. Follow these steps to hang your new electric fireplace properly.
1. Connect the Brackets
A wall-mounted electric fireplace or recessed electric fire instantly transforms any space. This is an excellent option for those who don't have a fireplace or live in apartments.
Choose where you'd like to put your electric fire. You should select a spot that isn't susceptible to moisture and is at a minimum, at least a few feet away from drapes and furniture. Once you've located a location, mark the wall with lines for the top and bottom plates of the fireplace frame.
Use a drill or other tool to drill exploratory holes into the wall. Examine for studs with a stud-detector and mark the drywall according to the location of the brackets for mounting your fireplace. Then, you need to build out the wall or patch and paint the drywall to prepare it for fireplace installation.
Depending on the type of wall-mounted fire, you might be required to install the firebox and screen as one unit or separate them with the use of a wall bracket. If you're uncertain about your capability to tackle this aspect of the project on your own, consider hiring an experienced general contractor or carpenter.
You will find a template included with most electric fireplaces. However, you should also keep a pencil level handy and pencil to mark the exact location where the wall brackets will be placed. Use the template to ensure that the power cable from the fireplace will connect to an outlet nearby to connect it.
Install the drywall as clean and as flush as possible to give the fireplace a sleek look. Add a trim piece to the bottom edge, and then paint and sand the entire frame for an elegant look.
Most wall-mounted electric fireplaces have hooks or slots on the back of the unit that you will insert into the slots or hooks on the mounting brackets. Make sure that the slots and hooks are aligned prior to when connecting the fire to the wall brackets. Once the fire is installed, you can add additional elements such as driftwood logs, crystal embers, or decorative rocks.
2. Check the Bottom Bracket
The space above the mantel, fireplace, or chimney breast is a great spot for hanging artwork. But, there is a line of distinction between an artistic arrangement & one that distracts from the overall look of the fireplace design.
A general rule is that a photograph should be 80percent of the width of the mantel or fireplace it is placed over. This will allow it to remain proportionate & look aesthetically pleasing on the wall. This guideline could be influenced by other ornaments and decorative pieces on the mantel.
If you're planning to put a photo above your fireplace, it's crucial that the frame is made of glass or other material that is able to withstand high temperatures. If you're unsure about the frame, you can test it frame with a temperature sensitive cloth to determine if it is suitable for this type of installation.
The most common issue with displaying pictures above an open flame is the risk of damage to artwork from smoke or heat that escapes. Although this is rarely an issue with a traditional gas or wood-powered fireplace, it's a good idea to check the recommendations of the manufacturer if you're contemplating using an electric fireplace that is mounted on the wall.
Most electrical fires come with a mounting bracket which can be attached to the wall with hanging screws or wall-mounted fixing systems. It is recommended to drill exploratory hole in an isolated area of the wall prior installing your electric fire. After that you can use a cable finder and pipe to ensure that there aren't any cables or pipes in the vicinity of the position you've chosen for mounting.
If so, you can either mount your fire over the electrical socket or move it to a different spot. If you decide to move it, make sure that the power cable will reach the electrical socket. This is essential especially for older homes and those with walls that are solid. If not the electric fire won't perform as it should. Certain models have a template included that shows you where to drill holes to make the holes Some require a spirit-level and pencil to mark the correct spots on your wall.
3. Connect the Power Cord
If you've installed a recessed electric fireplace, you may need to move the plug socket away from the wall to behind the fireplace. This can help create a more elegant appearance. Check Click That Link to make sure it is operating correctly.
The third way to mount an electric fireplace is by framing the space and constructing it into the wall. This will give you a traditional, finished look and allows for the installation of a mantel. The owner's manual for your model will include details regarding framing, wiring and the best way to secure the fire place.
Mark the location of your new electric fireplace on the wall using either a pencil or marker. Then, use a carpenter's level to ensure that the location is level and flat. You can use a studfinder mark the location so that you can be sure you're drilling in a secure area.
Use the electric drill after you've marked the installation location to make holes for bracket screws or hanging screws. Be sure to follow the exact instructions in the owner's guideline for this step, especially when you're installing the fireplace within a drywall. If you're not sure of how to do this you can always ask a professional to take care of the installation for you.
A cable organizer kit can be used to conceal power cords. These kits usually come with sleeves, clips or boxes to bundle cables. You can use fish tape or wire snakes to guide the cables. If you don't want to cut the drywall, a Powerbridge kit will provide a cleaner and safer connection.
Finally, you can camouflage the wires by painting them with paintable covers or by adhering them to the wall and skirting board. Be sure to keep the cover or tacks away from the source of heat however. This will shield the cord from damage and also prevent accidental contact.
4. Connect the Adapter
A wall-mounted electric fire place is a great option for home renovations or for those without the space or money to put in a gas fireplace. They are simple to hang and can be used straight out of the box and are an excellent choice for those looking for a chic modern touch or the warmth a fire provides. These units are designed to be hung as art on any wall, they can be recessed or not at all recessed and are fully electric and have fan-powered heating.
Before beginning the actual installation process, it's recommended to take stock of all the equipment and tools you'll need. Check the user manual for specific instructions about how to install your electric fire. Some models require brackets to be screwed directly into the wall, while others could have an installation plate that slides into slots or hookeds on the brackets. It is important to remove all combustible material from the area you are installing a recessed unit. As a rule, you should keep these materials at least 3 feet from the front of the fireplace.
After you've checked all the components, you need to connect your electric fireplace and ensure that it functions correctly. This is an essential step as it will ensure that the flame effect screen and heater function according to the specifications. This will give you an idea of the final product in its final configuration.
Cover the cord after you are satisfied that it's working correctly. This will help to keep the finished product neat and neat. You can achieve this by installing a new outlet that has a cord that can be tucked behind the unit. This will provide a seamless finish to your fireplace.